Fujikura FSM-60S Fusion Splicer
Fujikura FSM-60S Fusion Splicer
Fujikura FSM-60S Fusion Splicer
The FSM-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30" drop test.
The FSM-60S splices a fibre in 9 seconds and heats a 60mm splice sleeve in 30 seconds, for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fibre holder system), automated monitor image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on.
New software included provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.
Features:
- Highly durable – designed for tough environments
- World’s most compact & lightest of its class
- Core alignment with auto-fibre identification (PAS)
- 9 sec. splice time & 30 sec. tube-heat time
- Auto-start tube heater
- Optional fibre clamping methods
- Splice image capture facility
- Software upgrade via Internet
- Includes multi-function worktable
SPECIFICATIONS
Applicable fibres
SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) and other SMF including ITU-T G.657 fibres
Fibre Count
Single
Cladding diameter
80 to 150μm
Coating diameter
100 to 1000μm
Fibre cleaved length
8mm to 16mm using Sheath Clamp A, B or C/ 10mm using FH-60-250, FH-60-900
Actual average splice loss
0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS.
Measured by cut-back method relevant to ITU-T standards.
Splice time
Typical 9sec. with standard SM fibre.
Return loss
60dB or greater
Splicing modes
Total number available equals 100; for pre-set modes and user programmable modes
Splice loss estimate
Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate.
Attenuation splice function
Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an inline fixed attenuator
Storage of splice result
The last 2000 results to be stored in the internal memory.
Fibre display
X/Y, or both X and Y simultaneously
Magnification
300x for single X or Y view, or 187x for X and Y view.
Viewing method
By two CMOS cameras for fibre viewing and 4.1inches TFT colour LCD monitor
Image change over
The fibre image is turned upside down automatically according to the monitor position.
Operating condition
0-5000m above sea level, 0-95% RH and -10 to 50°C respectively.
Mechanical proof test
2N (standard)
Tube heater
Built-in auto-start tube heater with 10 heating modes and up to 20 for reference
Tube heat time
Typical 30sec.with FP-03 protection sleeve.
Applicable protection sleeve length
60mm, 40mm and a series of micro sleeves.
No. of splice/heating with battery
160 cycles with BTR-08.
Power supply
Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-13. 13.2Vd.c. with BTR-08
Terminals
USB1.1 (USB-Mini B) for data and video signal transfer to PC.
Wind protection
Max. wind velocity of 15m/s.
Dimensions
136(W) x 161(D) x 143(H) mm
Weight
2.3kg, with ADC-13 AC Adaptor, 2.7kg, with BTR-08 Battery
STANDARD PACKAGE
Description
Model No.
Q’ty
Note
Arc Fusion Splicer
FSM-60S
1pc.
--
Sheath Clamp
CLAMP-S60A
1pc.
Installed
Electrodes
ELCT2-20A
1 pair
Installed
Wind Protector Mirror
WPM-08
2pc.
Installed, replaceable by user
AC Adaptor/Battery Charger
ADC-13
1pc.
--
AC Power Cord
ACC-xx
1pc.
ACC-16 UK Type
Spare Electrodes
ELCT2-20A
1 pair
--
USB Cable
USB-01
1pc.
--
Quick Reference Guide
M-60S/18S-E
1pc.
English
Video Instruction Manual
V-60S-E
1pc.
CD, English
Warning & Cautions
W-60-E
1pc.
English
Splicing Report
-
1pc.
English
J-Plate
JP-05
1pc.
--
Carrying Case
CC-24-60S
1pc.
--
OPTIONAL ITEMS
Description
Model No.
Note
Fibre Holder
FH-60-250
For 250μm coating
FH-60-900
For 900μm coating
Sheath Clamp
CLAMP-S60A
For coating diameter up to 250μm, 8mm to 16mm cleave
For coating diameter of over 250μm, 16mm cleave
CLAMP-S60B
For coating diameter up to 1000μm, 8mm to 16mm cleave
CLAMP-S60C
For 900μm loose tube fibre
Battery Pack
BTR-08
--
Battery Charge Cord
DCC-14
Use for connecting BTR-08 and ADC-13
DC Power Cord
DCC-12
For ADC-13, cigarette lighter sockettype
DCC-13
For ADC-13, alligator clamp type
Magnifier
MGS-06
With bracket
Electrodes
ELCT2-20A
--
Wind Protector Mirror
WPM-08
--
