2 x UK Power, 4 x Cat.6 Couplers
POD 2/4 Desktop Power and Data Unit
2 x Individually Fused Power and 4 x Category 6 Couplers with Master Switch
Dont forget to order the Unique START Lead to power the POD up!
Tough and rugged aluminium desktop unit with the added advantage of category 6 couplers fitted to the rear to enable a quick and easy install.
- Tough aluminium body
- Master switch as standard
- Cat.6 jack to jack (Coupler) fitted
- Earthing point
- Individually fused to BS6396
- G Clamps for desk mounting
- Flat base for table mounting
- Adhesive pad option
- Short lead to Wieland male connector
- Order the Start leads separately to power this POD up
PLEASE NOTE: A Wieland plug to 13amp plug cable needs to be fitted, please order these separately (START1, START2 or START3, etc).
Sometimes a more cost effective or rugged solution is required, the POD has individually fused UK power to BS6396 with a short lead to male Wieland connector allowing multi length power cords to be connected (Order separately).
All POD’s include a master switch and Category 6 (Jack to Jack) built in coupler assemblies.
The couplers are used to link a front shuttered black RJ45 socket to a RJ45 socket at the back, RJ45 patch leads are plugged in from the rear of the POD to the data outlet.
A pair of desktop ‘G’ clamp allow mounting at the desk’s edge or an optional pair of adhesive pads allows mounting anywhere on top of the desktop.
Power leads and options
AP2 - Pair of adhesive pads
START 1 - 1 metre Wieland connector to 13A plug
START 2 - 2 metre Wieland connector to 13A plug
START 3 - 3 metre Wieland connector to 13A plug
START 4 - 4 metre Wieland connector to 13A plug
START 5 - 5 metre Wieland connector to 13A plug
START 6 - 6 metre Wieland connector to 13A plug